News

  • 0
  • 0

Global IN738 Powder market trend 2022-2029 High Purity 3D Printing Nickel-based Alloy IN738 Powder by Newsfrackfreedenton

How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains".
The problem of childbirth is related to the people's livelihood. Whether a country can prosper or not depends on the population. I saw a set of data a few days ago. The data shows that on January 1, 1990, 2,784 babies were born in Shanghai. Ten years later, on January 1, 2000, 1,148 babies were born in Shanghai. In 2010, the number became 380. , 2020 only 156 people, the decline in the birth rate is shocking. The three most critical reasons are: I don't want to give birth, I can't afford it, I can't give birth! The decline of the global population will bring a series of economic and social problems, among which the demand for IN738 Powder will also be affected.

About 3D Printing Nickel-based Alloy IN738 Powder:
Nickel-based Alloy IN738 is oxidation, low expansion, nickel-cobalt-ferrite, aluminum, chromium and niobium addition. The alloy has considerable interest in the aircraft gas turbine designers and material engineers for accommodating and gap control components, such as rings, housings, shields, and seals for compressors, turbines, and exhaust systems.
 
In-738 alloy is a vacuum smelting, vacuum casting, precipitated nickel-based alloy, has excellent high temperature and high-temperature corrosion resistance, better than many low chromium content high-strength high-temperature alloys. Its design provides an alloy for the gas turbine industry that has good creep strength up to 1800 * f and can withstand long exposure to engine-related high-temperature court environments. Alloy IN738 has superior and high temperature lasting Performance is comparable to the widely used alloys 713c, as well as substantially better vulcanization resistance.

The IN738 alloy is usually a vacuum fuse casting process of vacuum homogenization and other high strength, high-temperature nickel-based alloy processes. Typical gtingdom creates 200-400 * F metal overheating exceeded the liquid phase line temperature 1500, 1800 preheating temperature. The situation will vary depending on the size of the part and the shape of the door. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Nickel-based Alloy IN738 Powder in bulk.

3D printing Nickel-based superalloy IN738 powder

Composition(percentage by mass)
 

Ni

Cr

Co

Ti

Al

Mo

Ta

Bal

14.0-16.0

8.0-9.0

2.50-4.00

2.50-1-4.00

1.00-2.00

1.00-2.00


 

Ta

Nb

C

Fe

 Zr

B

O

1.00-2.00

0.50-1.50

<=0.15

<=0.10

<=0.10

<=0.15

<=0.01

 

category

Alloy grades and characteristics

Alloy number:

Nickel-based superalloy IN738 powder

Particle size:

15-45&mu;m, 15-53&mu;m, 53-120&mu;m, 53-150&mu;m

Morphology:

Spherical or nearly spherical

Appearance:

Grey

Package:

Aluminum bag, Vacuum packing

Application:

3D printing metal powder

Other applications:

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.


How is 3D Printing Nickel-based Alloy IN738 Powder produced?
The specific step of the production method of the chromium nickel-iron alloy is to use a chrome ore and nickel ore with a mineral heat furnace melt reducing process and a method of smelting a smelting.
The smelting temperature is 1920-1980K. The elements in the two ore are melted at high temperatures. To promote the reduction speed.
Carbon reduction chromium oxide generates the start temperature of 1373K; the reaction temperature of the formation of CR7C3 is 1403 K; the start temperature of CR23C6 is 1448k; the reduction of the start temperature of the reduction to form chromium is 1523K.
The mechanism of iron-element reduction is known that the start temperature of the iron oxide reduction reaction is lower than the CR2O3 reduction reaction. Since chromium is a mug with each other, the reduction reaction is easier, and the chromium in the nickel mine is also reduced to chromium iron.

Application of 3D Printing Nickel-based Alloy IN738 Powder:
The In-738 alloy provides an excellent combination of high heat creep and corrosion resistance, better than high strength super gold with lower chromium content. Inconel 738 is a nickel-based alloy, vacuum casting and precipitated hardening, providing excellent mechanical properties of 1800 &deg; F (982 &deg; C).
In general, the cutting performance of the IN-738 alloy is comparable to other high temperatures and high-strength nickel-based allies. Processing and grinding of IN-738 alloy.

The IN-738 alloy is developed to improve the casting performance of large cross-sectional sizes.
Maximum use of IN-738 alloy is an engine component in an industrial gas turbine industry, these components need to withstand high temperatures and thermal stresses as well as corrosion and sulfidation. The alloy is mainly used for gas turbines and jet engine components such as leaves, blades, and integral wheels.

 

Storage Condition of Nickel-based Alloy IN738 Powder:
The damp reunion will affect In738 powder dispersion performance and using effects, therefore, nickel-based alloy IN738 powder should be sealed in vacuum packing and stored in cool and dry room, the nickel-based alloy IN738 powder can not be exposure to air. In addition, the IN738 powder should be avoided under stress.

Packing & Shipping of Nickel-based Alloy IN738 Powder:
We have many different kinds of packing which depend on the nickel-based alloy IN738 powder quantity.
Nickel-based alloy IN738 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Nickel-based alloy IN738 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

 


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

 

In738 Powder Properties

Other Names Alloy IN-738, IN738, IN-738C, 738C, 738CL
CAS No. N/A
Compound Formula Ni Cr Al Fe Mo
Molecular Weight N/A
Appearance Gray to Black Powder
Melting Point 1230-1315
Boiling Point N/A
Density 8.11 g/cm3
Solubility in H2O N/A
Specific Heat 0.10 Btu/lb/&deg; F (70 &deg; F)
Poisson's Ratio N/A
Tensile Strength 159000 psi (70 &deg;F)
Thermal Conductivity 82 Btu/ft2/in/hr/&deg;F (400 &deg;F)
Thermal Expansion 6.45 x 10-6 (70-200 &deg;F)
Vickers Hardness N/A
Young's Modulus N/A
   
   

In738 Powder Health & Safety Information

Signal Word Danger
Hazard Statements H317-H351-H372
Hazard Codes Xn
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

Southern Copper Corp (SCCO.N) recently said its Peruvian mine remained closed after a six-week standoff with protesters and blamed the Peruvian government for failing to intervene in the safety of its 1,300 workers and their families.  

The company said in a statement that a recent agreement to end protests at the Cuajone mine required the company to withdraw complaints against protest leaders because railways transporting minerals and supplies remained blocked. Production has been suspended since the end of February.  

Peru's Energy Ministry said in a separate statement that it had also reached an agreement with Southern Copper to start talks to find common ground with local communities.  

"If we shut down for a year, the government will stop receiving more than 3.1 billion soles ($830 million) in taxes and royalties, and 8,000 direct and indirect jobs will be lost. This is what we want to avoid, "Southern Copper added in the statement.

Peru has faced a wave of protests from indigenous communities, who accuse mining companies of not providing enough jobs and funding to poor local residents.  

Central bank officials said last week that protests against copper mines such as MMG's Las Bambas and Southern Copper's Cuajone were dragging down the economy.  

Peru is the world's second-largest copper producer and mining is an important source of tax revenue for the country. It is estimated that the supply and prices of the IN738 Powder will be influenced by that.

Inquery us

Our Latest News

Global MnO2 powder market trend 2024-2026 What is Manganese Dioxide MnO2 Used For? by Newsfrackfreedenton

Brazil, the world's largest sugar producer, has recently switched to ethanol MnO2 powder price is predicted to go higher in the future. What is Manganese Dioxide MnO2?Manganese dioxide is an inorganic compound with the molecular formula M…

Global boron carbide powder market trend 2022-2029 What is Boron Carbide Used For? by Newsfrackfreedenton

Boron carbide (B4C) is an extremely hard boron-carbon ceramic and covalent material used in tank armor, bulletproof vests, engine damage powder, and many industrial applications.…

Global natural graphite market trend 2025-2029 What is Natural Graphite Used For? by Newsfrackfreedenton

Since 2022, Russia-Ukraine geopolitical conflicts have intensified, and global energy prices have risen sharply, with international natural gas prices hitting historic highs. As the most important transitional energy source in the transition from fos…