Chromium Oxide Coatings

Since the beginning of this year, people around the world have felt the pressure of rising prices. Not only the rise in oil prices but also different industries have seen soaring prices. According to the latest data, from August 2021 to the present, the inflation rate in the United States has risen for 6 consecutive months, and this data has soared from the previous 5.3% to 7.9% today. Inflation in the United States, the global Many countries have been affected.
According to experts' forecasts, the inflation rate in the United States may exceed 10% this year, which will face the danger of collapse, which has a great impact on global inflation, including chromium oxide.

Chromium oxide (Cr2O3) is a kind of dark green powder with metallic luster and belongs to hexagonal or amorphous crystal. Cr2O3 melting point is 2265℃ ~ 2435℃ and Cr2O3 density is 5.2g/cm3. It is a neutral oxide.
 
Chromium oxide has good spraying process performance, its spraying process specification is wide, it is less sensitive to overheating during spraying, and the coating is not easy to crack when local overheating occurs. The spray coating is very dense and has high bonding strength with the substrate, so it is easy to be machined such as grinding and polishing.
 
However, the deposition efficiency of pure chromium oxide powder is low, which will increase the cost of the coating. The chromium oxide coating prepared by flame spraying or plasma spraying is dense and insoluble in acid, alkali and alcohol. After proper sealing treatment, the coating can be used in the environment with chemical corrosion medium.
 
Cr2O3 coatings properties
The chemical properties of plasma sprayed chromium oxide coating are very stable, insoluble in acid, alkali, salt and various solvents, excellent corrosion resistance to medium impregnation, high temperature erosion resistance to corrosive gases such as H2S and SO2, stable to atmosphere, fresh water, sea water and light, but soluble in hot sodium bromide solution. Chromium oxide coating has good hydrophilicity and a uniform water film is formed on the surface of the coating.
 
What are Cr2O3 coatings used for?
Cr2O3 coatings can be used as abrasive wear resistant coating, hard surface wear and erosion wear coating below 540℃, cavitation wear resistant coating, corrosion wear resistant coating for parts used in chemical media below 250℃ (need to be properly sealed), such as pistons, plungers, chemical machinery shafts, pump seals, wear-resistant rings, slide valves, cylinder linings, exhaust fans, polishing and polishing fixtures, etc. Fiber wear-resistant coating, such as guide wheel, friction wheel, roller roller of chemical fiber spinning machine, magnetic conductive and wear-resistant coating, such as tape recorder head, etc.
The sprayed Cr2O coating is dark dark green with strong covering ability and high and stable thermal emissivity in a wide range of off-line wavelengths. Commonly used in infrared radiation coating (such as electric heating pipe coating), high temperature magnetic conductive wear-resistant coating, etc.
 
Chromium oxide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Cr2O3 price, you can send us your inquiry for a quote. (sales3@nanotrun.com)
 
Chromium oxide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted Cr2O3 manufacturer and Cr2O3 supplier with over 12-year-experience. We ship our goods all over the world.
 
If you are looking for high-quality chromium oxide powder, please feel free to contact us and send an inquiry. (sales3@nanotrun.com)
 

The EU’s draft REPowerEU plan calls for an increase of 15TWh of rooftop PV capacity by 2022. The draft also calls for EU and national governments to take action this year to reduce the time required to obtain permits for rooftop PV installations to three months, and proposes that "all new buildings and existing buildings with an energy grade OF D or above should have rooftop PV installations by 2025".  

In addition, the European Commission is likely to set a target for installed PV capacity of 300GW by 2025 and 500GW by 2030. Some members are more aggressive, with Austria, Belgium, Lithuania, Luxembourg, and Spain demanding a 1TW target for 2030.  

The REPowerEU initiative, worth 195 billion euros, was proposed by the EU on March 8 to phase out member states' dependence on Russian fossil fuels by 2030. In a few days, the European Commission will present a package to implement the RePowerEU strategy.  

As an important application scenario of distributed PV, rooftop PV is not limited to land, and the development conditions are relatively convenient.  

Since the end of 2021, Spain, France, the Netherlands, and other countries have introduced policies and measures such as government subsidies, tax cuts, fee reductions, and accelerated grid-connection approval to encourage the development of distributed PV.  Europe's potential for rooftop PV is huge and will continue to be an important growth pole for the industry, according to Wood Mackenzie.

Luoyang Tongrun Nano Technology is a trusted chemical supplier and manufacturer providing high-quality chemicals and Nanomaterials. If you are looking for the chromium oxide, please feel free to contact us and send an inquiry.

Inquiry us